Long Range Wireless Access Point / Client Bridge
Version 1.0
13
4 Access Point Operating Mode
Logging
In
To configure the device through the web-browser, enter the IP address of the device
(default:
192.168.1.1
) into the address bar of the web-browser and press
Enter
.
Make sure that the device and your computers are configured on the same subnet.
Refer to
Chapter 2
in order to configure the IP address of your computer.
After connecting to the IP address, the web-browser will display the login page.
Specify
admin
for both the user name and password.
After logging in you will graphical user interface (GUI) of the device. The navigation
drop-down menu on left is divided into four sections:
1.
Status
: Displays the overall status, connection status, and event log.
2.
System
: This menu includes the system properties, IP and Spanning Tree settings.
3.
Wireless
: This menu includes status, basic, advanced, and security.
4.
Management
: This menu includes the admin setup, SNMP, firmware upgrade, and
save/restore backup.
