Long Range Wireless Access Point / Client Bridge
Version 1.0
48
Service Name
: Specify the name of the ISP.
Type
: Select a reconnection type:
Keep Alive
(A connection to the Internet is
always maintained),
Connect on Demand
: You have to open up the Web-based
management interface and click the
Connect
button manually any time that you wish
to connect to the Internet.
Domain Name Service
: Select
Get Automatically from ISP
if the ISP will provide
the DNS address, if not, select
Use these DNS servers
and specify the primary and
secondary DNS server IP address.
Click on the
Apply
button to save the changes.
6.4.2 VPN Pass Through
Click on the
VPN Pass Through
link under the
Router
drop-down menu. This page
allows you to enable the pass through feature.
PPTP Pass Through
: Place a check in this box if you would like to enable this pass
through. PPTP is a protocol (set of communication rules) that allows corporations to
extend their own corporate network through private "tunnels"
L2TP Pass Through
: Place a check in this box if you would like to enable this pass
through. Layer 2 Tunneling Protocol is a transport protocol that enables tunneling
through the Internet for the establishment of virtual private networks.
IPSec Pass Through
: Place a check in this box if you would like to enable this pass
through. IPSec is a VPN protocol used to implement secure exchange of packets at
the IP layer.
Click on the
Apply
button to save the changes.
6.5 Wireless
Click on the
Wireless
link on the
navigation drop-down menu. You will
then see three options: wireless network,
wireless security, and wireless
advanced settings. Each option is
described below.
6.5.1 Wireless
Network
The
Wireless Network
page allows you to configure the wireless mode, channel,
SSID, and security settings.
