EnGenius EOC-2610 User Manual Download Page 9

Page: 9 / 60

Long Range Wireless Access Point / Client Bridge

Version 1.0

2 Understanding the Hardware

2.1 Hardware Installation

1. Place the unit in an appropriate location after conducting a site survey.
2. Plug one end of the Ethernet cable into the Network port of the PoE injector and

another end into your PC/Notebook.

3. Plug one end of another Ethernet cable to AP/Bridge port of the PoE injector and the

other end into you cable/DSL modem (Internet)

4. Insert the DC-inlet of the power adapter into the 24V port of the PoE injector and the

other end into the power socket on the wall.

This diagram depicts the hardware configuration

2.2 Hardware Description

The images below depict the front and rear panel of the Access Point / Client Bridge.

PoE Injector

PC, Cable/DSL
Modem

Power Outlet

Ethernet

AC/DC cable

Ethernet

Access Point

Front Panel

Rear Panel

Summary of Contents for EOC-2610





























































Search results

Summary of Contents for EOC-2610

Reviews:

Related manuals for EOC-2610

Brands by name

Popular brands

EnGenius EOC-2610, User Manual

Search results

Summary of Contents for EOC-2610

Reviews:

Related manuals for EOC-2610

Brands by name

Popular brands