12.4 Client Router
In Client Router Mode, the ENH200’s internal DHCP server allows LANs to automatically
generate an IP address to share the same Internet. Connect an Access Point/WISP wirelessly
and connect to LANs using a wired connection.
Refer to Chapter 13 to check the Access Point’s configuration.
Client Router
Step1
Log in to the Web Configurator with the default IP address
192.168.1.1
Step2
Select your country or region’s regulation.
Step3
For
Operation Mode
, select
Client Router
from
System
Properties
.
Step4
Change your
Local Area Network
setting to
Obtain an IP
Address Automatically
.
Step5
Use site survey to scan Access Points that are available in
nearby areas.
Step6
Select the Access Point with you want to associate.
Step7
Set up authentication settings that match the Access Point’s
settings.
Step8
Set your WAN connection type using the WAN settings provided
by your ISP.
Step9
Click
Apply
to save all changes.
Client Router’s IP setting must match to the Access Point’s subnet.
