Wireless Client
Step1
Select the wireless mode with which you want to associate.
Step2
Use site survey to scan nearby Access Point and either select the
Access Point to which you want to connect, or enter the SSID
manually.
Step3
Configure the VLAN ID in your wireless device if available.
Step4
Select the appropriate authentication type and password.
Access Point Mode does not provide DHCP server, so the Wireless Client IP
address must be configured manually using the same Local Area Network subnet.
12.2 Client Bridge Mode
Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP
Router to join the network.
Refer to Chapter 13 to check the Access Point’s configuration.
Client Bridge
Step1
Log in to the Web Configurator with the default IP address
192.168.1.1
Step2
Select your country or region’s regulation.
Step3
For
Operation Mode
, select
Client Bridge
from
System
Properties
.
Step4
Use site survey to scan Access Points that are available in
nearby areas.
