11.3 SNMP Settings
Click the
SNMP Settings
link under the
Management
menu to monitor network-attached
devices using the Simple Network Management Protocol (SNMP). SNMP allows messages
(called “protocol data unit’s) to be sent to various parts of a network. Upon receiving these
messages, SNMP-compatible devices (called agents) return data stored in their Management
Information Bases.
SNMP Enable/Disable
Enable or disable the ENH200 SNMP function.
Contact
Enter the contact details of the device.
Location
Enter the location of the device.
Community Name
Enter the password for accessing the SNMP community for
read-only access.
Community Name
Enter the password for accessing the SNMP community for read
and write access.
Trap Destination IP
Address
Enter the IP address where SNMP traps are to be sent.
Trap Destination
Community Name
Enter the password of the SNMP trap community.
Save/Apply / Cancel
Click
Save/Apply
to apply the changes or
Cancel
to return
previous settings.
Clicking
Save/Apply
change the setting immediately. You cannot undo the action.
