8.2 Wireless Security Settings
The Wireless Security Settings section lets you configure the EOH200’s security modes: WEP,
WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly
recommend you use WPA2-PSK.
8.2.1 WEP
Security Mode
Select
WEP
from the drop-down list to begin the configuration.
Auth Type
Select
Open System
or
Shared
.
Input Type
Select an input type of
Hex
or
ASCII
.
Key Length
Level of WEP encryption applied to all WEP keys. Choices are
Select a 64/128/152-bit password lengths.
Default Key
Specify which of the four WEP keys the ENH200 uses as its
default.
Key1
Specify a password for security key index No.1. For security,
each typed character is masked by a dot (
).
Key2
Specify a password for security key index No.2. For security,
each typed character is masked by a dot (
).
Key3
Specify a password for security key index No.3. For security,
each typed character is masked by a dot (
).
Key4
Specify a password for security key index No.4. For security,
each typed character is masked by a dot (
).
