ENFORCER Indoor Proximity Card Reader
SECO-LARM U.S.A., Inc.
7
The Master Card:
The master card is necessary to do any programming of the ENFORCER Proximity Card Reader.
It will be necessary to configure a master card if:
The proximity card reader is being installed for the first time, OR
The most recently configured master card is lost
Only one card can be programmed as the master card. Programming a new master card will
automatically delete the old one.
Programming the Master Card:
To program the master card:
Step Action
Reaction
1
Cut power to the proximity card reader
2
Move the CMC jumper from OFF to ON
(see “Overview” on page 3)
3
Restore power to the proximity card
reader
Reader starts beeping, and blue status LED
flashes to signal the start of a 1-minute
countdown for configuring the master card
4
Move the CMC jumper from ON to OFF
Reader stops beeping
5
Tap a currently unused proximity card
2 Beeps
6
Press the “Bell” button to save the
master card code and exit the master
card configuration mode
2 Beeps
7
Label the card as “Master Card” and put
in a secure location
NOTE 1:
If the master card is not correctly programmed within the 1-minute countdown period, the
blue status LED will turn off. In this case, repeat the above procedure.
NOTE 2:
If the master card is lost, program a new master card by repeating the above procedure.
LED Indicators:
1.
Status indicator (blue LED) – a steady ON during normal
operation, or flashes while the proximity card reader is in the
programming mode or in the lock-down mode.
2.
Operation indicators (LEDs numbered 1~5) – show the status
of the proximity card reader while in the operation mode or in
the programming mode.
While the proximity card reader is in the operation mode
and it reads a programmed card, the LED corresponding
to that card’s user group turns to a steady ON.
While the proximity card reader is in the programming
mode, the LEDs show the status of the feature settings
(see “Programming” on page 8 for details).
Front View
Status
indicator
Operation
indicators
Card reader
window
Doorbell
button
