ENFORCER Indoor Proximity Card Reader
12
SECO-LARM U.S.A., Inc.
Advanced Programming (continued):
Deleting an Entire User Group:
Occasionally it may be necessary to delete an entire user group. For example, there may be a
group of temporary users whose contract has ended, or several cards are lost and the
administrator is not sure which cards to delete.
Step Action
Reaction
1
Tap the master card 2 times
Blue status LED flashes, and LED 2
flashes once
2
Wait 2 seconds
2 Beeps, then LEDs 1, 2, and 3 flash
3
Press the “Bell” button three times
LED 3 turns to a steady ON to indicate
that the reader is in the delete user group
mode
4
Wait 2 seconds
2 Beeps; all five LEDs flash
5
Press the “Bell” button 1 to 5 times,
corresponding to the user group to be
deleted
The LED corresponding to the chosen
user group turns to a steady ON to
indicate that the group will be deleted
6
Wait 2 seconds
2 Beeps
7
Press the “Bell” button to confirm that the
user group is to be deleted
The LED corresponding to the user group
to be deleted flashes; 2 Beeps confirm
deletion
8
To delete multiple user groups, repeat
steps 5-7
2 Beeps for each user group confirm that
the group was deleted.
9
Exit programming by tapping the master
card once
2 Beeps
Programming the Door Unlock Mode:
The door unlock output can be programmed for one of two modes:
1.
Toggle output
2.
Timed output (1~60 sec)
NOTE
: The factory default setting is timed output (2 sec).
To program the reader for toggle:
Step Action
Reaction
1
Tap the master card 3 times
Blue status LED flashes, and LED 3
flashes once
2
Wait 2 seconds
2 Beeps, then LEDs 1 and 2 flash
3
Press the “Bell” button once
LED 1 turns to a steady ON to indicate
that the door lock output is in toggle mode
4
Wait 2 seconds
2 Beeps confirm that toggle mode was set
5
Exit programming by tapping the master
card once
2 Beeps
