ENFORCER Indoor Proximity Card Reader
SECO-LARM U.S.A., Inc.
11
Advanced Programming (continued):
Deleting User Cards:
There are three ways to delete user cards:
1.
Delete a single user card.
2.
Delete a lost user card.
3.
Delete a group of user cards.
Step Action
Reaction
1
Tap the master card 2 times
Blue status LED flashes, and LED 2
flashes once
2
Wait 2 seconds
2 Beeps, then LEDs 1, 2, and 3 flash
3
Press the “Bell” button once
LED 1 turns to a steady ON
4
Wait 2 seconds
2 Beeps
5
Tap the user card to be deleted once
The card’s user group LED flashes once
for 1 second; 2 Beeps
6
To delete multiple user cards, repeat step
5
The card’s user group LED flashes once
for 1 second; 2 Beeps
7
Exit programming by tapping the master
card once
2 Beeps
Deleting a Lost User Card:
A specific lost user card can only be deleted if the owner of the proximity card reader has kept
careful records of each user card number and the user of that card. Deleting a particular user card
requires the use of the user card which was programmed immediately prior to the lost user card.
For example, if user card 7 in user group 3 was lost, to delete it, the administrator would need
access to user card 6 in user group 3.
Step Action
Reaction
1
Tap the master card 2 times
Blue status LED flashes, and LED 2
flashes once
2
Wait 2 seconds
2 Beeps, then LEDs 1, 2, and 3 flash
3
Press the “Bell” button twice
LED 2 turns to a steady ON
4
Wait 2 seconds
2 Beeps
5
Tap the user card which was programmed
immediately before the lost user card once
The lost card’s user group LED flashes
once for 1 second; 2 Beeps
6
To delete multiple user cards, repeat step
5
The lost card’s user group LED flashes
once for 1 second; 2 Beeps
7
Exit programming by tapping the master
card once
2 Beeps
NOTE 1:
If user card 1 in a particular user group is lost, it can be deleted by using the super user
card for that group.
NOTE 2:
Any new user cards programmed into the reader will automatically fill any empty spots.
For example, if user card 7 in user group 3 was deleted, the next new user card added to
user group 3 will be the new user card 7.
Deleting a Single User Card:
