ENFORCER Indoor Proximity Card Reader
14
SECO-LARM U.S.A., Inc.
Advanced Programming (continued):
Creating/Deleting Super User Cards:
The ENFORCER PR-312S-PQ Proximity Card Reader can be programmed to read up to five super
user cards, one for each of the five user groups. The super user cards can be used for the
following tasks:
1.
Disable the card reader for times when no one is expected inside the protected premises.
2.
Return card reader to normal operation.
3.
Unlock the door connected to the card reader regardless of whether it is enabled or disabled.
If a user group already has a super user card associated with it, programming a new super user
card will automatically delete the old one.
To program a super user card:
Step Action
Reaction
1
Tap the master card 5 times
Blue status LED flashes, and LED 5
flashes once
2
Wait 2 seconds
2 Beeps, then LEDs 1 and 2 flash
3
Press the “Bell” button once
LED 1 flashes once
4
Wait 2 seconds
2 Beeps, then LEDs 1 through 5 start to
flash
5
Press the “Bell” button 1 to 5 times to
choose a user group
The LED corresponding to the super
user’s assigned group turns to a steady
ON
6
Wait 2 seconds
2 Beeps
7
Tap a currently unused user card
2 Beeps
8
For multiple super user cards, repeat
steps 5-7.
2 Beeps for each card confirms that the
card was programmed into the reader
9
Exit programming by tapping the master
card once
2 Beeps
NOTE:
When a new super user card has been programmed, immediately label it as a super user
card and mark which user group it belongs to.
