ENFORCER Wireless Video Door Phone
SECO-LARM U.S.A., Inc.
15
Tamper Alarm:
The tamper alarm activates anytime the camera is removed from the bracket, warning the user of
possible vandalism. The tamper alarm will sound on the camera and any connected monitors.
1.
To disable the tamper alarm if no monitors are paired with the camera:
a.
Return the camera to the bracket.
b.
If the alarm persists, unplug the camera and remove the battery.
c.
Return the camera's battery and reconnect it to power.
2.
To disable the tamper alarm if one or more monitors are paired with the camera:
a.
Repeatedly press the "OK" button on all paired monitors.
b.
If the alarm persists, unplug the camera and remove the battery.
c.
Unplug each monitor and remove each monitor's battery.
d.
Return the camera's battery and reconnect it to power.
e.
Insert each monitor's battery and reconnect each monitor to power.
3.
To permanently disable the tamper alarm, see the "Alarm setting" section in "Programming
the Advanced Settings," pg. 11.
Troubleshooting:
The monitor's screen is blank
Make sure the "ON/OFF" or "OK" button was pressed to wake
the monitor
Make sure the monitor's battery is charged
Plug the charger directly into the monitor
The monitor is not charging
Remove the battery from the battery compartment and clean
both the battery contacts and the monitor's connection contacts
Make sure the kickstand is extended when placing in the
charger stand
Make sure the power adapter is correctly connected to the
charger stand
Connect the power adapter directly to the monitor
The monitor does not ring
Check that the volume is turned up
Check that the monitor is in standby mode
Check that the monitor is placed in the mounting bracket
The monitor cannot connect to the
camera
Check that the monitor has been paired with the camera
Check that the monitor is within range of the camera
The monitor's screen image quality
is poor
Adjust the monitor's display brightness
Clean the camera's lens using a soft, clean cloth
Change the position of the camera
Move the monitor away from potential sources of interference
(microwaves, television, lamps, etc.)
The monitor is unable to activate the
camera's relay
Make sure the user is pressing the "Menu/Unlock" button when
in two-way communication (the microphone icon is lit and does
not have an "X" through it)
Check the wiring between the camera and the optional door
locking device
