Enerzone Euromax, Installation And Operation Manual

Page: 53 / 100

Euromax Pellet Stove Installation and Operation Manual
53
9.2 Testing Components
If you suspect an electrical component to be defective, you can test it from the
“TROUBLESHOOT” page. From the Main Status Page, press the Settings icon and
choose “TROUBLESHOOT” in the menu. Page 5 and 6 will allow you to test every electrical
component. Note that you will be able to test only components when the stove is OFF and
that all the components are no more in function.
For example, if you press on the white square next to “GEAR MOTOR 1”, the auger 1 will turn
for 30 seconds. This will give you the possibility to see the auger running and hear the motor
running as well.
9.3 Main Error Codes, Possible Causes and Solutions
WARNING: RISK OF ELECTRICAL SHOCK. IF YOU NEED TO MANUALLY TEST,
MANIPULATE OR REPLACE ANY COMPONENTS, THE STOVE NEEDS TO BE
DISCONNECTED FROM THE WALL OUTLET.
This section contains main error codes, possible causes and many suggestions to guide you
in resolving them. After giving an error code, your stove will shut down by itself and start a
cool down cycle. If you want to start your stove again, you will need to press on the
button and then on the “ON/OFF” button . Your stove will only restart when
the cool down cycle is completed.
NOTE: IF, AFTER PERFORMING ALL THE POSSIBLE SOLUTIONS MENTIONED IN THE
FOLLOWING SECTION, YOU ARE STILL EXPERIENCING PROBLEMS WITH YOUR
STOVE, CALL YOUR LOCAL DEALER OR A SERVICE TECHNICIAN AT (418) 878-3040.
YOU CAN ALSO WRITE AN EMAIL TO TECH@SBI-INTERNATIONAL.COM. ALL EMAILS
ARE ANSWERED WITHIN A 24H DELAY.
NOTE: IF YOU NEED TO CONTACT YOUR DEALER OR TECHNICAL SUPPORT, MAKE
SURE TO HAVE THE MODEL OF YOUR STOVE AND THE SERIAL NUMBER ON HAND.
(THEY CAN BE FOUND ON THE CERTIFICATION LABEL INSIDE THE HOPPER LID).
RESET