Enerzone Euromax, Installation And Operation Manual

Page: 38 / 100

38
Euromax Pellet Stove Installation and Operation Manual
7.5 Shutting Down Procedure
To turn your stove off, press the “ON/OFF” icon on the Main Status Page. The cooling
cycle will take a few minutes and the blowers will continue to function while the stove is
cooling down.
IMPORTANT: DO NOT DISCONNECT THE POWER CORD TO TURN OFF THE STOVE.
7.6 Signs of an Overheating Stove
Under normal conditions, the flame should have a bright yellow color and be very active, but
stable (see
Appendix C: Flame Characteristics ). If you see the flame getting lazy, very high
and orange, it may be a sign that there is something wrong. Usually, overheating issues are
caused by too much restriction in the venting system, a blocked heat exchanger, a lack of
combustion air or a lack of maintenance.
If this happens, your stove will become very hot. If the stove becomes too hot, “UNIT
OVERHEAT” code will appear on the LCD screen. Before starting the stove again make sure
the recommended maintenance has been done properly. Press the “RESET” button and then
press the “ON/OFF” icon on the Main Status Page. If a “UNIT OVERHEAT” code occurs
twice, call you dealer. He will be able to give you some recommendations so this code won’t
appear again.
WARNING: IF YOU CHOOSE A STOVE THAT IS TOO SMALL FOR YOUR HOUSE AND
YOU NEED TO OPERATE IT AT THE MAXIMUM SETTING FOR A LONG PERIOD OF
TIME, YOU MAY END UP OVERHEATING THE STOVE. THE STOVE AND ITS
COMPONENTS LIFE EXPECTANCY WILL BE REDUCED.
WARNING: IF ANY EXTERNAL PART OF THE STOVE BEGINS TO GLOW RED, THE
STOVE IS OVERHEATING. IMMEDIATELY TURN THE STOVE OFF. DO NOT UNPLUG IT
AND DO NOT OPEN THE DOOR. UNPLUGING THE STOVE WILL DISABLE ALL THE
SAFETY FEATURES OF THE STOVE.