Enerzone Euromax, Installation And Operation Manual

Page: 30 / 100

30
Euromax Pellet Stove Installation and Operation Manual
6.1.5 Adjusting the Combustion Level (Heat Output)
Press on the
pellet burn rate
adjustment button
Press + or -
to adjust
the burn rate
The stove’s input range goes from 10,500 BTU to 70,000 BTU. To change combustion level,
select the flame icon on the main status page to display the “+” and “-” combustion level
settings.
Note: Input range may vary according to the type of pellets being used.
Even though your stove can burn a large variety of wood pellets, we strongly recommend the
use of high quality pellets to obtain maximum performance out of your stove (see
Section
5.2.1 Proper Fuel ). When using lower quality combustible, a restrictive venting system or
using the stove in high altitude, you may need to adjust the “PILOT SETTING ADJUSTMENT”
and the “FUEL QUALITY ADJUSTMENT”. These two (2) settings are available from the
“SETUP” page.
Note: To obtain optimal results make sure the venting system, heat exchanger and
exhaust channels are cleaned before performing any setting changes.