enervent Pingvin XL eAir, Installation Instructions Manual, Page: 185 / 212

185
Installation instructions for professionals
X1 X2 X3 X4 X5
X7
X24
X12
X23
X19
F3
X29
DO6
DO5
DO4
DO3
DO1 DO2
X28 X27
X26
X15
X8
24V
GND
JP5
JP2
MD MOTHERBOARD
SLP
POISTO TULO LTO
AO
5
AO
3
DI4 DI3 DI2 DI1 AI4 AI3 AI2 AI1
X18
AO
7
AO
6
DI8 DI7 DI6 DI5 AI6 AI5
X9
X10
DI9 GND AO
4
DI12 GND AO
2
DI11 GND A01
RHT30
X17
Ethernet
MODBUS-RTU
+24V
AO5
DI10
GND
GND AI8 AI7 +5V
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8
RHT30
X6
DO8
DO7
AO
8
GND AI10 AI9 AI8 AI7
KE SI VA PU
2A
DO digital outputs
X1-X7, X12 Sensors
AI analog inputs DI digital inputs AO analog
outputs
eAir motherboard connections and their locations
Documenting the commissioning
•
Fill in warranty information.
•
Write down all possible changes made to the factor
settings in the parameter table at the end of this
manual.
•
Fill the air rate measurement document. A copy of the
document is at the end of this manual.
Warranty is not in effect for units that do not have
the air quantity measurements documented.
It is very important that all changes in parameters
are written down. This way the information has
backups in case the automation is damaged
(e.g. by lightning strike).
FOR INFORMATION
When you want to set unit settings, tap the upwards
arrow in the main screen > choose
Settings > scroll the
screen to System settings > enter password 6143 > OK >
I/O settings > choose AI settings (analog input settings)
or DI settings (digital input settings) > choose the
connection you want to set. Then tap the green text on
the row you want to select, and select the unit you added
from the list displayed on the screen.