Enerpac WCR4000, Instruction Sheet

Page: 7 / 20

ENGLISH
7
Fig. F
• Swing the reaction roller bracket (8)
outward, away from center of tool.
3.3 To connect the hoses (fig. F)
Make sure all accessories meet the
pressure requirements.
Make sure the quick connect
couplings are securely attached
before operating the tool.
The tool is fitted with male and female
quick-connect couplings. Use Enerpac
twin safety hoses only. Refer to the table
below:
Hose model number Description
THQ-706T
Two hoses, length
6 m (19.5 feet)
THQ-712T
Two hoses, length
12 m (39 feet)
• Remove the hose dust caps.
• Connect the hose with the female
coupling (15) to the advance
coupling (4).
• Pull the sleeve on the female coupling
of the hose over the advance
coupling.
• Tighten the sleeve.
• Connect the hose with the male
coupling (16) into the return
coupling (5).
• Pull the sleeve on the return coupling
over the male coupling of the hose.
• Tighten the sleeve.
• Connect the hoses to the pump.
Refer to the pump instruction manual.
Fig. E
Fig. D