Luba
MD
GL Collector – Technical manual
Version 1.0-EN-January 2012
© Enerconcept Technologies inc.
24
4.8 Polycarbonate beginning of row
−
All polycarbonate sheets are pre-cut to fit the collector’s width.
(Install the polycarbonate sheets with the air chambers aligned vertically).
−
Start the installation of the polycarbonate sheets on the casing at the beginning of the
collector row (with the side having the protective film to the outside*).
−
Remove the protective film.
−
Fix the polycarbonate sheet on the upper part of the collector and the duct connection with
La-112 screws.
Protective film
*
Important:
If the polycarbonate sheet is installed with the wrong side facing the sun, this
will lead to voidance of manufacturer’s warranty.
15
15
16
16
17
17
