Step 5
NOTE:
Some hardware components may be pre-assembled. Be aware of
Nylon lock nuts not fully screw onto bolts, they must be tightened
with a wrench to ensure proper engagement.
5A.
Attach L Shape Holder (N) to Console (L) using
Two M5x10mm Pan Head Phillips Screw (#20)
5B.
Attach Console Mounting Plate (19) to Upright Frame (C) using:
Two M8x16mm Button Head Cap Screw (#17)
Two M8 Flat Washer (#18)
5B.
Connect Heart Rate Cables (22) to the Heart Rate Cables of the
Console (L).
5C.
Connect Wire Harness (23) to the Wire Harness of the Console (L).
5D.
Attach Console (L) to Console Mounting Plate (19) using:
Four M5x10mm Pan Head Phillips Screw (#20)
14
