Step 4
NOTE:
Some hardware components may be pre-assembled. Be aware of
Nylon lock nuts not fully screw onto bolts, they must be tightened
with a wrench to ensure proper engagement.
4A.
Insert the Holder Top Half (H) to UPRIGHT FRAME (C)
4B.
Insert the Holder Bottom Half (Q) to MAIN FRAME (A)
4C.
Connect Upper Heart Rate Cables (#22) to Lower Heart Rate
Cables (#13).
4D.
Connect Upper Wire Harness (#23) to Lower Wire Harness (#14).
4E.
Attach Upright Frame (C) to Main Frame (A) using:
Two M10x50mm Socket Head Cap Screw (#15)
Two M10 Washer (#3)
Two M10 Nylon Lock Nut (#7)
4F.
Attach the Holder Top Half (H) to the Holder Bottom Half (Q) using:
Three ST4.2x18mm Pan Head Phillips Screws (#12)
4G.
Attach the Water Bottle Holder (#16) to Upright Frame (C) using:
Two ST4.2x18mm Pan Head Phillips Screws (#12)
12
