background image

F D C 3 3 0 2   U s e r   M a n u a l

F D C 3 3 0 2   U s e r   M a n u a l

Warranty Repair  

If you believe your equipment is in need of repair, call EndRun Technologies and ask for a customer 

service agent.  It is important to contact us first as many problems may be resolved with a phone call.  

Please have the serial number of the unit and the nature of the problem available before you call.  If 

it is determined that your equipment will require service, we will issue an RMA number.  You will be 

asked for contact information, including your name, address, phone number and e-mail address.

Ship the unit prepaid in the original container or a container of sufficient strength and protection  to 

EndRun Technologies.  EndRun will not be responsible for damage incurred during shipping to us.  

Be sure the RMA number is clearly identified on the shipping container.  Our policy is to fix or repair 

the unit within 5 business days.  If it is necessary to order parts or if other circumstances arise that 

require more than 5 days, an EndRun service technician will contact you.

Loaner units are not included as part of the standard warranty.

Repair After Warranty Expiration

If the warranty period has expired, we offer repair services for equipment you have purchased from 

EndRun.  Call and ask for a customer service agent.  It is important to contact us first as many prob-

lems may be resolved with a phone call.  Please have the serial number of the unit and the nature 

of the problem available before you call.    If it is determined that the equipment has failed and you 

want EndRun to perform the repairs, we will issue you an RMA number.  Ship the unit prepaid in 

the original container or a container of sufficient strength and protection to EndRun Technologies.  

EndRun will not be responsible for damage incurred during shipping to us.  Customer is responsible 

for shipping costs to and from EndRun Technologies.  Be sure the RMA number is clearly identified 

on the shipping container.  After the equipment has been received we will evaluate the nature of the 

problem and contact you with the cost to repair (parts and labor) and an estimate of the time neces-

sary to complete the work.   

Limitation of Liability

The remedies provided herein are Buyer’s sole and exclusive remedies.  EndRun Technologies shall 

not be liable for any direct, indirect, special, incidental or consequential damages, whether based on 

contract, tort or any other legal theory.

EndRun Contact Information

Address:  EndRun Technologies

   

2270 Northpoint Parkway

   

Santa Rosa, California 95407

   

U.S.A.

Phone: 

(707)573-8633

Fax: 

(707)573-8619

Sales: 

1-877-749-3878 or (707)573-8633

   

[email protected]

Support:  1-877-749-3878 or (707)573-8633

   

[email protected]

Summary of Contents for FDC3302















































Reviews: