EndRun FDC3302, User Manual

Page: 20 / 46

F D C 3 3 0 2 U s e r M a n u a l 10
C H A P T E R T H R E E
11 F D C 3 3 0 2 U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
All entered commands are assumed to be terminated with a carriage return. Line feeds are ignored.
All responses from the FDC3302 are terminated with a carriage return and a line feed.
Detailed Command
Descriptions
alarmlist
This query-only command displays the current system alarms as a list of descriptive messages. The
following is an example:
Query:
alarmlist
Chassis response:
Input B signal absent
Disable B asserted
alarmstat
This query-only command displays the current system alarms as a series of characters, listed left to
right. Each character is a ‘0’, a ‘1’ or an ‘x’. A ‘1’ means the corresponding alarm is active. A ‘0’
means it is OK. An ‘x’ means the optional component is not installed in this particular unit.
Group 1 (6 characters) Group 2 (10 characters) Group 3 (4 characters)
Signal Input A absent Output 1 signal absent System Oscillator error
Signal Input B absent Output 2 signal absent Flash error
Disable A asserted Output 3 signal absent FPGA error
Disable B asserted Output 4 signal absent Network port error (option)
Power Supply A failed Output 5 signal absent
Power Supply B failed (option) Output 6 signal absent
Output 7 signal absent
Output 8 signal absent
Output 9 signal absent
Output 10 signal absent
Query:
alarmstat
Chassis response:
01000x 0000000000 000x
(An alarm exists on
Signal Input B. Also,
Power Supply B and the
Network Port are not
installed.)
NOTE
System alarms will clear automatically once the problem has been corrected.