Endress ESE 604 DHG DIN, Translation Of The Original Operating Instructions

Page: 35 / 92

Operate power generator ESE 604 DHG DIN
Status at: October 2018 ESE 604 DHG (ES) DIN
35
The following requirements must be met:

An even and firm substratum outdoors

There are no inflammable materials at the operating site

There are no explosive materials at the operating site
WARNING!
Leaking engine oil and petrol can contaminate the soil
and groundwater.

Prevent leaking of engine oil and petrol.
Set up the generator as follows:
1. Prepare the work site.
2. Transport the generator to the work site.
3. Attach the exhaust hose if necessary (a special accessory
see 3.1.4.2)

The generator is set up and ready for use.
4.3
Refuelling the generator
Proceed as follows to refuel the generator.
The following requirements must be met:

The generator must be switched off (see 0).

the device must be cooled down.

Adequate ventilation must always be available

Appliances switched off or disconnected
WARNING!
Leaking engine oil and petrol can burn or explode!
Requirements
Setting up the generator
Requirements