Endress ESE 604 DHG DIN, Translation Of The Original Operating Instructions

Page: 57 / 92

Using special fittings / accessories
Status at: October 2018 ESE 604 DHG (ES) DIN
57
5.4
Remote start device
Standard for type no.: 151022 / 151024
Proceed as follows to operate the generator using the re-
mote start device.
The following requirements must be met:

generator is ready for operation
WARNING!
Devices with a remote start device are fitted with an auto-
matic choke. You do not have to use the manual choke during
an electrical start.
Connect up the remote start device as follows:
Fig. 5-4: Connecting up a remote start device
1. Unscrew protective cap on the remote start socket
(Fig.
5-4-(1))
.
2. Insert plug for the remote start operating status / genera-
tor connecting cable into the remote start socket and lock
in place by turning to the right.

Remote start device is ready for use.
Requirements
Connecting up a remote
start device