RMA42
Installation
Hauser
9
1.
Push the upper top-hat rail clip upwards and the lower clip downwards until the clips engage
in position.
2.
Position the device on the top-hat rail from the front.
3.
Slide the two top-hat rail clips together until they engage in position.
To disassemble the device push the top-hat rail clips upwards or downwards (see 1.) and remove
the device from the top-hat rail. Also only one clip can be opened and the device can be tilted
accordingly to remove it from the top-hat rail.
3.5
Post-installation check
• Is the top-hat rail clip engaged?
• Is the device securely fixed to the top-hat rail?
• Are all the plug-in terminals securely locked in place?
• Are the temperature limits observed at the installation location (see Section 3.2)?
