Operating elements and display
RMA42
18
Hauser
O
Back
Return to main menu
*) Is only displayed if "Application" = "Diff pressure" is configured.
Diagnostics menu
Description
F
Current diagn
Current diagnostic
O
Last diagn
Last diagnostic
O
Operating time
Operating time of the device
O
Diagnost logbook
Diagnostics logbook
O
Device information
Device information
O
Back
Return to main menu
Expert menu
Description
F
Direct access
Direct access to an operting function
O
System
System settings
Access code
Protection of operating menu by means of access code
Overfill protect
Overfill protection
Reset
Device reset
Save user setup
Save settings made in the setup
O
Input
Inputs
The following parameters are available in addition to the parameters from the Setup menu:
Analog in 1 / 2
Analog input 1 / 2
Bar 0%
Lower limit for bargraph of analog input
Bar 100%
Upper limit for bargraph of analog input
Decimal places
Decimal place for analog input
Damping
Damping
Failure mode
Failure mode
Fixed fail value
Fixed value in the event of an error (only, if Failure mode = Fixed
value)
Namur NE43
Error limits according Namur
Allow reset
Allow reset of min/max values via Display menu
O
Output
Outputs
The following parameters are available in addition to the parameters from the Setup menu:
Analog out 1 / 2
Analog output 1 / 2
Fail mode
Failure mode
Fixed fail value
Fixed value in the event of an error (only, if Fail mode = Fixed value)
Relay 1 / 2
Relay 1/2
Time delay
Switching delay time
Operating mode
Operating mode
Failure mode
Behavior in the event of an error
Setup menu
Description
