Technical data
RMA42
48
Hauser
Remote operation
Configuration
The device can be configured with the PC software or on site using the operating keys. FieldCare
Device Setup is delivered together with the Commubox FXA291 or TXU10-AC (see ’Accessories’)
or can be downloaded free of charge from www.endress.com.
Interface
4-pin socket for the connection with a PC via Commubox FXA291 or TXU10-AC interface cable
(see 'Accessories')
10.0.8
Certificates and approvals
CE mark
The device meets the legal requirements of the EU directives. Hauser confirms that the
device has been tested successfully by affixing the CE mark.
Ex approval
Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by your
E+H Sales Center on request. All explosion protection data are given in a separate documentation
which is available upon request.
Other standards and
guidelines
• IEC 60529:
Degrees of protection by housing (IP code)
• IEC 61010-1: 2001 Cor 2003
Safety requirements for electrical equipment for measurement, control and laboratory use
• EN 60079-11
Explosive atmospheres - Part 11: equipment protection by intrinsic safety "I"
10.0.9
Documentation
• Overview brochure: System components - Indicators with control unit for field and panel
mounting, power supplies, barriers, transmitters, energy managers and surge arresters: FA016K/
09
• Ex documentation:
ATEX II(1)GD [Ex ia] IIC: XA095R/09/a3
