Proservo NMS5
46
Hauser
6.2
HOME Position
After turning on the power, LCD shows the current data on HOME position.
Figure. 50:
HOME Position
The letters A, B, C and D stand for the areas where information on measured values and status of the device
are displayed:
The meanings of message appearing on LCD (display) is explained in the following table.
Area
Information
A
Current Level
B
Current Temperature
C
Gauge Status
D
Displacer Status
Gauge Status
Description
G - RE
Reference position for measuring
UP
The measuring wire is hoisted.
STOP
The measuring wire stops.
LIQU
The liquid is being measured.
U - IF
The upper interface level is being measured.
LIF
The lower interface level is being measured.
BOTM
The tank bottom level is being measured.
U - DE
The upper liquid density is being measured.
M - DE
The middle liquid density is being measured.
B - DE
The bottom liquid density is being measured.
CAN
Resetting RELE.OVER TENS (over tension error).
TEAC
Calibration is being measured.
blank
Measuring is not possible.
6 Operation
