Endress+Hauser Proline Promass Q 500, Operating Instructions Manual

Page: 268 / 280

Technical data Proline Promass Q 500 PROFIBUS PA
268 Hauser
Ex approval The devices are certified for use in hazardous areas and the relevant safety instructions are
provided in the separate "Safety Instructions" (XA) document. Reference is made to this
document on the nameplate.
Sanitary compatibility • 3-A approval
• EHEDG-tested
Certification PROFIBUS PROFIBUS interface
The measuring device is certified and registered by the PROFIBUS User Organization
(PNO). The measuring system meets all the requirements of the following specifications:
• Certified in accordance with PROFIBUS PA Profile 3.02
• The device can also be operated with certified devices of other manufacturers
(interoperability)
Radio approval Europe:
RED 2014/53/EU
United States of America:
CFR Title 47, FCC Part 15.247
Canada:
RSS-247 Issue 1
Japan:
Article 2 clause 1 item 19
Additional country-specific approvals on request.
Additional certification CRN approval
Some device versions have CRN approval. A CRN-approved process connection with a CSA
approval must be ordered for a CRN-approved device.
Tests and certificates
• Pressure test, internal procedure, inspection certificate
• EN10204-3.1 Material certificate, wetted parts and secondary containment
• PMI test (XRF), internal procedure, wetted parts, test report
• EN10204-2.1 confirmation of compliance with the order and EN10204-2.2 test report
Testing of welded connections
Option Test standard Component
ISO 23277 AL2x (PT)
ISO 10675-1 AL1 (RT, DR)
ASME
B31.3
NFS
ASME
VIII Div.1
Appx. 4+8
NORSOK
M-601
Measuring tube Process connection
CF x PT RT
KK x PT RT
KP x PT RT
KR x VT, PT VT, RT
K1 x PT DR
K2 x PT DR
K3 x PT DR