Endress+Hauser Proline Promass Q 500, Operating Instructions Manual

Page: 235 / 280

Proline Promass Q 500 PROFIBUS PA Diagnostics and troubleshooting
Hauser 235
12.11.1 Function scope of the "Device reset" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to this customer-specific value. All other parameters are reset to the factory
setting.
Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.
Restore S-DAT backup Restore the data that are saved on the S-DAT. The data record is restored from the
electronics memory to the S-DAT.
12.12 Device information
The Device information submenu contains all parameters that display different
information for device identification.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag →  236
Serial number →  236
Firmware version
→  236
Device name →  236
Order code →  236
Extended order code 1
→  236
Extended order code 2 →  236
Extended order code 3 →  236
ENP version →  236
PROFIBUS ident number →  236
Status PROFIBUS Master Config →  236