Endress+Hauser Proline Promass Q 500, Operating Instructions Manual

Page: 150 / 280

Operation Proline Promass Q 500 PROFIBUS PA
150 Hauser
11.4.1 "Measured variables" submenu
The Measured variables submenu contains all the parameters needed to display the
current measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow
→  150
Volume flow →  150
Corrected volume flow →  150
Density →  150
Reference density →  151
Temperature →  151
Pressure value →  151
Concentration
→  151
Target mass flow →  151
Carrier mass flow →  151
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  102).
Signed floating-point
number
Volume flow – Displays the volume flow currently
calculated.
Dependency
The unit is taken from the Volume flow
unit parameter (→  102).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  102).
Signed floating-point
number
Density – Shows the density currently measured.
Dependency
The unit is taken from the Density unit
parameter (→  102).
Signed floating-point
number