Endress+Hauser Proline Promag H 500, Operating Instructions Manual

Page: 230 / 240

Technical data Proline Promag H 500 PROFIBUS DP
230 Hauser
Certification PROFIBUS PROFIBUS interface
The measuring device is certified and registered by the PNO (PROFIBUS User Organization
Organization). The measuring system meets all the requirements of the following
specifications:
• Certified in accordance with PROFIBUS PA Profile 3.02
• The device can also be operated with certified devices of other manufacturers
(interoperability)
Radio approval The measuring device has radio approval.
For detailed information on the radio approval, see the Special Documentation
Pressure Equipment
Directive
• With the identification PED/G1/x (x = category) on the sensor nameplate,
Hauser confirms conformity with the "Essential Safety Requirements" specified
in Appendix I of the Pressure Equipment Directive 2014/68/EU.
• Devices not bearing this marking (PED) are designed and manufactured according to
good engineering practice. They meet the requirements of Article 4 paragraph 3 of the
Pressure Equipment Directive 2014/68/EU. The range of application is indicated in
tables 6 to 9 in Annex II of the Pressure Equipment Directive 2014/68/EU.
Measuring instrument
approval
The measuring device is qualified to OIML R117 and has an OIML Certificate of
Conformity (optional).
Additional certification PWIS-free
PWIS = paint-wetting impairment substances
Order code for "Service":
• Option HC : PWIS-free (version A)
• Option HD : PWIS-free (version B)
• Option HE : PWIS-free (version C)
For more information on PWIS-free certification, see "Test specification" document
TS01028D
Other standards and
guidelines
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory
use - general requirements
• IEC/EN 61326
Emission in accordance with Class A requirements. Electromagnetic compatibility (EMC
requirements).
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control
equipment
• NAMUR NE 32
Data retention in the event of a power failure in field and control instruments with
microprocessors
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters
with analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics