PROline Promag 10
11 Description of Device Functions
Hauser
95
11.4 Group USER INTERFACE
Function description USER INTERFACE
FORMAT
Use this function to define the maximum number of places after the decimal
point displayed for the reading in the main line.
Options:
XXXXX. - XXXX.X - XXX.XX - XX.XXX -X.XXXX
Factory setting:
X.XXXX
!
Note!
• Note that this setting only affects the reading as it appears on the display, it
has no influence on the accuracy of the system's calculations.
• The places after the decimal point as computed by the measuring device
cannot always be displayed, depending on this setting and the engineering
unit. In these instances an arrow appears on the display between the
measured value and the engineering unit (e.g. 1.2
→
l/h), indicating that
the measuring system is computing with more decimal places than can be
shown on the display.
CONTRAST LCD
Use this function to optimise display contrast to suit local operating conditions.
User input:
10...100%
Factory setting:
50%
TEST DISPLAY
Use this function to test the operability of the local display and its pixels.
Options:
OFF
ON
Factory setting:
OFF
Test sequence:
1.
Start the test by selecting ON.
2.
All pixels of the main line and additional line are darkened for minimum
0.75 seconds.
3.
The main line and additional line show an "8" in each field for minimum
0.75 seconds.
4.
The main line and additional line show a "0" in each field for minimum
0.75 seconds.
5.
The main line and additional line show nothing (blank display) for minimum
0.75 seconds.
When the test completes the local display returns to its initial state and the
setting changes to OFF.
