Endress+Hauser magphant, Operating Instructions Manual

Page: 40 / 44

Technical data Magphant
40 Hauser
Ex approval The measuring device is certified for use in hazardous areas and the relevant safety
instructions are provided in the separate "Safety Instructions" (XA) document. Reference is
made to this document on the nameplate.
The separate Ex documentation (XA) containing all the relevant explosion protection
data is available from your Hauser sales center.
ATEX, IECEx
Zone 2
FM
• NI Class I Division 2 Groups A-D
• DIP/II, III/1/EFG
• Type 4X
CSA
• Class I, Division 2 Groups A-D
• Class II Groups E-G
• Class III
• Type 4X
Other standards and
guidelines
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory
use - general requirements
• IEC/EN 61326
Emission in accordance with Class A requirements. Electromagnetic compatibility (EMC
requirements).
15.13 Accessories
Overview of accessories available for order →  33.
15.14 Supplementary documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• W@M Device Viewer ( www.endress.com/deviceviewer ): Enter the serial number
from nameplate
• Hauser Operations App : Enter the serial number from the nameplate or
scan the 2D matrix code (QR code) on the nameplate
Standard documentation
Document type Documentation code
Brief Operating Instructions KA01451D
Technical Information TI00036D
Device-dependent
additional documentation
Document type Documentation code
Safety Instructions XA00025D