5
Instrument configuration
After switching on, the instrument carries out
a self-test and then switches to measuring
mode.
Now it can be configured and calibrated for
the first time. The values set by the user are
kept even in the event of a power failure.
The following function groups are available on
the Liquisys M (the groups that are only
available in the Plus packet are marked
accordingly in the functional descriptions):
Setup mode
➜
SETUP 1 (A)
see Chap. 5.2.1
➜
SETUP 2 (B)
see Chap. 5.2.2
➜
CURRENT INPUT (Z)
see Chap. 5.3
➜
CURRENT OUTPUT (O) see Chap. 5.4
➜
ALARM (F)
see Chap. 5.5.1
➜
CHECK (P)
see Chap. 5.5.2
➜
RELAY (R)
see Chap. 5.5
➜
SERVICE (S)
see Chap. 5.6
➜
E+H SERVICE (E)
see Chap. 5.7
➜
INTERFACE (I)
see Chap. 5.8
Calibration mode
➜
CALIBRATION (C)
see Chap. 5.9
Selecting and locating functions is facilitated
by a code displayed for each function in a
special display field. The structure of this
coding is given in Fig. 5.2.
The first column indicates the function group
as a letter (see group designations). The
functions in the individual groups are counted
from the top to the bottom and from the left to
the right.
2
s
F3
Err.Delay
DISPLAY4.CDR
Function coding.
The displayed code indicates
the function position in the
function group.
Additional information
Fig. 5.1
Display
Information for the user
A
A1
A2(1)
A2(2)
A2(3)
A231
A221
A232
MATRIX.CDR
Fig. 5.2
Function coding
OM253FE5A.CHP
Liquisys M COM 223 F / 253 F
Instrument configuration
Hauser
21
