Endress+Hauser Fieldgate FXA520, Operating Instructions Manual

Page: 81 / 108

Fieldgate FXA520 7 Viewing Information (User Mode)
Hauser 79
System Log
The system log displays all the activities since the last start, e.g. e-mail delivery, time fetch, alarms,
etc. Up to 25 lines are displayed. The log is deleted when the Fieldgate is switched off. Table 7-7
explains the significance of the parameters.
Table 7-7: System log messages with meaning
System log message Meaning
changing config page '<page-name>' from <ip-addr> A configuration page has been changed from the IP address
indicated. Possible <page-name>s:
• loc: Fieldgate Location
• user: User Setup
• if: Network Setup
• hart: HART Setup
• special: Special
• info: Information
changing sensor data '<device-id>' from <ip-addr> Field device data have been changed from the IP address
indicated
email delivered to < 1st / 2nd > recipient < service alarm /
limit alarm / measurement >: <subject>
An e-mail was sent to the corresponding receiving group
hardware-lock closed The hardware lock has been closed (i.e. the configuration of
the Fieldgate and the connected field devices can now no
longer be remotely altered)
hardware-lock opened The hardware lock has been opened
service adapter connected
service adapter aborted
service adapter disconnected
Service adapter has been connected
Connection via service adapter has been aborted
Service adapter cable has been disconnected
time fetched (<protocol>)
• internal time <seconds>s ahead
• internal time <seconds>s behind
Time has been fetched from the Internet. The internal clock
has been adjusted accordingly.
time switching to <time zone> Automatic adjustment of the time server to a different time
zone. The parameter "Time Offset (related to UTC)" under
"Settings" -> "Network" -> "Time Server Setup" was
automtically adjusted by the time server as a result of a
change in "Timezone Setting (valid for http time service)"
User '<user>' changed password from <ip-addr> A user has changed his/her password from the IP address
indicated
SMS send to xxxxxx A short SMS message has been sent to telephone number
xx.
DynDNS OK The Fieldgate could register with at DynDNS with its IP
address and can now be reached by its URL
< Log> cleared from <ip-addr> An Administrator has a cleared a log at the IP address under
ter "Settings" -> "Special" -> "Clear Log Information"
DHCP stopped The DHCP Client was stopped since no DHCP server
replied. In this case the IP address set manually under "Set-
tings" -> "Network" -> "IP-Address" is used
BOOTP failed - using manual entry The BOOTP Client was stopped, because no server reacted.
In this case the IP address set manually under "Settings" ->
"Network" -> "IP-Address" is used.