Endress+Hauser Fieldgate FXA520, Operating Instructions Manual

Page: 103 / 108

Fieldgate FXA520 12 Appendix
Hauser 101
12.2 XML data elements
Table 12-1 lists the XML data elements together with the type of information they carry. The XML
data is a structured document with a document header and body. The Fieldgate data is sandwiched
between two identifiers <xxx> and </xxx> which indicate the start and finish of the data element.
Data elements can be nested to form sections containing related information.
Element
Data Type Description
<?xml version="1.0"
encoding="iso-8859-1"?>
Document header
<fieldgate ser="470009010A0"
tag="Hauser Fieldgate"
type="full"
devices="all">
tag field Tag for fieldgate data<ser>:serial number fieldgate
<tag>: name fieldgate,
<type>: "full"/"partial" (short=1),
<devices>: "all /"single" (id=, tag=)
<rev_xml> string Document Revision
<time> timestamp Current fieldgate time (UTC time)
<timezone> unsigned16 Timezone (timeoffset to utc in minutes)
<ff_version> string Hardware and software revision
<gsmp> string GSM-Provider
<gsms> string Signal quality GSM Signal
<gsmti> timestamp Timestamp
<os_version> string operating system version
<conf> string hardware configuration Fieldgate
<ip> string IP address of Fieldgate
<device id="_4..20mA-1 "
tag="Levelflex FMPP40"
type="INTRN">
tag field device data: <id>: Unique-ID device,
<tag>: Tag des Gerätes
<type>: "INTRN"
<hlsts1>, <hlsts2>,<hlsts3>,<hlsts4> string Limit value status, channels 1 - 4: PV, SV, TV and QV
<hltime1>, <hltime2>, <hltime3>,
<hltime4>
Timestamp Timestamp change of limit value status, channels 1 - 4:
PV, SV, TV and QV
<chn>, <chn2>, <chn3>, <chn4> integer Channel: 01 = HART channel 1, 10 = HART channel 2,
11 = RS485
<ctime>, <ctime2>, <ctime3>,
<ctime4>
Timestamp Timestamp of first command 000 (HART)
(brings: Expanded Device Type Code, Revision Levels, Device ID)
<v1>, <v2>, <v3>, ´<v4> float Process variable, channels 1 - 4: PV, SV, TV and QV
<u1>, <u2>, <u3>, <u4> float Unit of process variable, channels 1 - 4: PV, SV, TV and QV
<vstslvl> integer Device error
0: OK
1: Warning
2: Error (according to HART6-Spec)
<vsts> string Answer code and fault status(hex)
<vtime> Timestamp Timestamp of command 000
<v1_100> float Primary variable percent of range
<v1_lc> float Primary variable loop current
<stsext> string Status externer Module (FXZ520)
<fnum> float Expanded Device type Code des Gerätes (HART)
<datecode> float Herstellungsdatum des Gerätes (HART)
<desc> string Beschreibung der Gerätetyp (HART)
<tag> string Messstellungbezeichnung des Gerätes
<msg> string User text (HART
<serno> integer Seriennummer des Gerätes (HART)
<hwrev> integer Hardware-Revision des Gerätes (HART)
<swrev> integer Software-Revision des Gerätes (HART
<devrev> integer Revision des Gerätes (HART
<cmdrev> integer Kommando-Revision des Gerätes (HART
<preamble> integer Number of preambles(HART
<stime> timestamp Timestamp of cmd000(HART)
(brings: Expanded Device Type Code, Revision Levels, Device ID)
<pid> integer Product idenitfication number (HART
<type> string Type of device (INTRN = data internal, HART = data from device)
<dev> string Device designation