Endress+Hauser Fieldgate FXA320, Operating Instructions Manual

Page: 55 / 106

6 Configuring the Fieldgate Fieldgate FXA320
53 Hauser
6 Configuring the Fieldgate
This chapter describes the user interface of the Fieldgate Web server as well as the setting up of
ranges, alarms etc. within it.
NOTE!
You cannot change device parameters with the Fieldgate Web Server. This requires the help of a
configuration tool, e.g. FieldCare, that uses Fieldgate as a pass-through interface
6.1 Logging on
Once the IP address or domain name has been entered in your web browser and the connection
made, you are prompted to enter a user name and the password.
NOTE!
• All Fieldgate FXA320 passwords are case sensitive and are limited to 8 characters without
spaces
Default user roles and
passwords Table 6-1 lists the user roles with passwords that are currently available in the Fieldgate. Security
Setup, chap. 6.3.2, provides more information on setting up passwords etc.
Table 6-1: Fieldgate user roles and rights
NOTE!
• To avoid unauthorized access to the Fieldgate, we recommend that the user names and passwords
are changed during commissioning.
6.1.1 Disconnecting
To exit the web browser, simply close the internet browser.
Role Default
user name Default
password Rights
Administrator super super Can access Fieldgate in both User and Administrator Mode:
• Can configure network settings
• Can set all passwords and user IDs
• Can change visualisation page settings
• Can set events, alarms, e-mail and time parameters
• Can set special page options
• Can reset Fieldgate to factory settings
User eh eh Can access Fieldgate in User Mode only:
• Can change user password
• Can view settings, information, devices etc.