Endress+Hauser Fieldgate FXA320, Operating Instructions Manual

Page: 100 / 106

Fieldgate FXA320 12 Appendix
Hauser 98
12.2 XML data elements
Table 12-1 lists the XML data elements together with the type of information they carry. The XML
data is a structured document with a document header and body. The Fieldgate data is sandwiched
between two identifiers <xxx> and </xxx> which indicate the start and finish of the data element.
Data elements can be nested to form sections containing related information.
Element Data Type Description
<?xml version="1.0"
encoding="iso-8859-1"?> Document header
<fieldgate ser="470009010A0"
tag="Hauser Fieldgate"
type="full"
devices="all"> tag field Header for Fieldgate data <ser>:serial number fieldgate
<tag>: name fieldgate
<type>: "full"/"partial" (short=1),
<devices>: "all /"single" (id=, tag=)
<rev_xml> string Document Revision
<time> timestamp Current fieldgate time (UTC time)
<timezone> unsigned16 Timezone (timeoffset to utc in minutes)
<ff_version> string Hardware and software revision
<gsmp> string GSM provider
<gsms> string Signal quality GSM Signal
<gsmti> timestamp Timestamp
<os_version> string Operating system version
<conf> string Hardware configuration Fieldgate
<ip> string IP address of Fieldgate
<device id="4...20 mA-1"
tag="Tank 1"
type="INTR"> tag field Header for device data:
<id>: Unique-ID device, 4...20 mA-x, BINARY-x
<tag>: Tagname device
<type>:"INTRN"
<vtime> Timestamp Timestamp
<tag> string Device tag
<hlsts1> string Limit value status of PV
<hltime1> Timestamp Timestamp change of limit value status of PV
<v1> float Process variable (PV)
<u1> float Unit of process variable (PV)
<vstslvl> integer Device status
0: OK
1: Warning
2: Error
<vsts> string Response code & field device status (hex)
<type> string Type of device (INTRN = data internal)
<dev> string Device designation
<man> string Device manufacturer
<unid> string Unique identifier of device
<param> Header for parameter data
<dch> boolean 1: Process variable (PV) in overview
<p4> float Output value at 4.00 mA input current (internal sensor only)
<p20> float Output value at 20.00 mA input current (internal sensor only)
<r> boolean 1: Send alarm mail on sensor error
<i> boolean 1: Send alarm mail on entering limits (PV)
<o> boolean 1: Send alarm mail on leaving limits (PV)
<si> boolean 1: Send SMS on entering limits (PV)
<so> boolean 1: Send SMS on leaving limits (PV)
<t1ch> string Additional text information line 1 (PV)
<t2ch> string Additional text information line 2 (PV)
<lo> float Low limit for process value (PV)
<ll> float Low low limit for process value (PV)
<hi> float High limit for process value (PV)
<hh> float High high limit for process value (PV)
<alt> float Value for rate of change limit on process value (PV)
<atime> integer Time for rate of change limit on process value (PV)
<cnho> integer Counter hold time = (chno +1)x 50 ms