Endress+Hauser Ceraphant PTP31B, Operating Instructions Manual

Page: 52 / 92

Overview of the onsite display operating menu Ceraphant PTC31B, PTP31B, PTP33B IO-Link
52 Hauser
Switch output
1)
Level
0 Level
1 Level
2 Level
3 Description Details
1 x PNP 2 x PNP 1 x PNP +
4-20 mA
   FNO NO contact for window function →  70
   FNC NC contact for window function →  70
 B
2)
dS2 Switching delay time, output 2 →  68
 B
2)
dR2 Switchback delay time, output 2 →  68
Ou2 Output 2 -
 B
2)
HNO NO contact for hysteresis function →  70
 B
2)
HNC NC contact for hysteresis function →  70
 B
2)
FNO NO contact for window function →  70
 B
2)
FNC NC contact for window function →  70
   HI Max value (maximum indicator) →  70
   LO Min value (minimum indicator) →  71
   RVC Revision counter →  71
   RES Reset →  71
ADM Administration -
   LCK Unlocking code →  72
   COD Locking code →  72
DIS Display -
   DVA PV Display measured value →  73
A
3)
PV'/, Display the measured value as a percentage of the set span -
   SP Display set switch point -
   DRO Display measured value rotated by 180° →  73
   DOF Display off →  73
DIAG Diagnosis -
   STA Current device status →  56
   LST Last device status →  56
SM1 Simulation output 1 →  56
   OFF -
   OPN Switch output opened -
   CLS Switch output closed -
SM2
5)
Simulation output 2 →  58
Current output simulation →  57
  OFF -
 B
2)
OPN Switch output opened -
 B
2)
CLS Switch output closed -
A
3)
3.5 Simulation value for analog output in mA -
A
3)
4 Simulation value for analog output in mA -
A
3)
8 Simulation value for analog output in mA -
A
3)
12 Simulation value for analog output in mA -
A
3)
16 Simulation value for analog output in mA -