PlasmaQuant 9100 (Elite)
Maintenance and care
59
}
Remove the fork clamp and remove the spray chamber.
}
Carefully place the spray chamber to one side.
}
Unscrew the torch from the carriage on the rail guide.
}
First release the outer tube, and then the inner tube, from the holder
with a rotating motion.
CAUTION! The quartz tubes are very fragile and are firmly mounted in
the ground glass connector of the holder. Wear protective gloves for
working with glass when disassembling the torch.
}
Unscrew the connection piece from the holder. Release the injector with
a rotating motion.
}
Remove the quartz bonnet from the induction coil.
}
Place all glass components in aqua regia for approx. 12 h.
}
Rinse the glass components under deionized water (<1 µS/cm) and dry
them with compressed air or argon.