Autosampler ASPQ 3300
PlasmaQuant MS product family
126
11.3.4
Replacing the fuses
Replace the fuses of the autosampler as follows:
1.
Switch off the autosampler at the power switch and pull the mains cable from the
connection on the autosampler.
2.
Pull out the fuse holder. To do so, insert a screwdriver blade into the slot in the
fuse holder and carefully pry out the holder.
3.
Replace defective mains fuses. Use only fuses of the type T 5A H 250V, 5 x 20mm.