multi N/C pharma UV
Safety instructions
9
2
Safety instructions
For your own safety and to ensure error-free and safe operation of the analyzer
multi N/C pharma UV, please read this chapter carefully before using the appliance.
Observe all safety notes listed in this user manual and all messages and displayed by
the control and analysis software on the monitor.
2.1
Safety markings on the analyzer
Safety symbols have been attached to the analyzer and accessories whose content
must always be observed.
Damaged or missing safety symbols can cause incorrect actions leading to personal
injury or material damage! The safety symbols must not be removed! Damaged safety
symbols must be replaced without delay!
The following safety symbols have been attached to the analyzer and accessories:
Fire, naked flame and
smoking prohibited!
Warning against dangerous
electrical voltage
Warning against
hazardous substances
Warning against hot
surface
Warning against corrosive
substances
Warning
mercury
The device contains restricted substances (according to
directive SJ/T 11363-2011). Analytik Jena GmbH
guarantees, that those hazardous substances may not
leak out during the next 25 years when the device is
used in accordance with its intended purpose.
2.2
Technical condition
The analyzer corresponds in its design and construction to the current state of the art
technology. Unauthorized modifications or changes, especially such that affect the
safety of the staff and the environment, are generally not allowed.
The following has to be observed:
Any manipulation of the safety equipment is prohibited! In case of an accident
manipulations of the safety equipment will be interpreted as deliberate!