DEVICE CONFIGURATION
smart Econ - emz-HCW - 180116
127
Manual switching of outputs
Note:
To do this, first set the operating mode for the ›ENTIRE UNIT‹ to ›OFF‹.
(Example, depending on the selected system)
• Select an output and change the switching status if necessary.
Simulate temperatures
(Example, depending on the selected system)
• Select the desired temperature sensor and change the desired temperature if necessary.
First set the temperature sensor to be simulated to ›YES‹, then set the desired value.
“Change values” on page 23
TEST OUTPUTS
^
Heat Generator 1 <30>
ON
pump heat circ. 1 <36>
OFF
pump dhw <32>
ON
pump circ. <34>
OFF
Y ou can sw itch the indicated devices
on and of f directly.
In case of problems => press <INFO>!
i
SIMULA TE TEMPERATURE
^
outdoor temp. <10>
NO
desired value
34.0
---------------
f low heat gen. <20>
NO
desired value
44.2
---------------
BA CK
i
