DEVICE CONFIGURATION
130
smart Econ - emz-HCW - 180116
›HEAT CIRCUITS‹ menu (Installer)
(Example, depending on the selected system)
The ›HEAT CIRCUITS‹ menu shows the global set points and a selection of heating circuits.
• Change the global values applicable to all heating circuits, if necessary.
The parameters ›global day temp.(°C)‹ and ›global eco temp. (°C)‹ offer the option of entering
room setpoint temperatures centrally.
Provided that the use has been enabled for the respective heating circuit, see the parameters
›use global day temp.‹ and ›use global eco temp.‹ (see below).
• Select a heating circuit, e.g. ›HEAT CIRCUIT 1‹.
Make the settings for the other heating circuits accordingly.
(Example, depending on the selected system)
PLEASE SELECT
^
ENTIRE UNIT
HEAT CIRCUIT 1
HEAT CIRCUIT 2
HEAT CIRCUIT 3
HEAT CIRCUIT 4
BACK
i
HEAT CIRCUIT 1
^
SETTINGS ROOM 1
HEAT CURVE
PUMP SETTINGS
BACK
i
