39357-0-1018
Page 75
REMOTE CONTROL OPERATION INSTRUCTIONS
ACCENT LIGHT CONTROL
The light function controls the light by the dimmable light control.
To activate this function, use the Mode Button
Figure 71a
to
index to the Light icon.
See Figures 84 and 85.
The intensity of the output can be adjusted through six levels.
Use the Up/Down Arrow Buttons
Figure 71a
to adjust the output
level. A single “beep” will confirm reception of the command.
OFF
Figure 84
OFF
Figure 85
CONTINUOUS PILOT/INTERMITTENT PILOT (CPI/IPI) SELECTION
With the system in “OFF” position press the MODE key
(Figure
70a)
to index to the CPI mode icon.
See Figures 85 and 86.
Pressing the UP ARROW key will activate the Continuous Pilot
Ignition mode (CPI).
Pressing the DOWN ARROW key will return to IPI.
A single “beep” will confirm the reception of the command.
Figure 86
Figure 87
Summary of Contents for MILLIVOLT STANDING PILOT DVX36FP31L-4
Page 52: ...39357 0 1018 Page 52 LOG PLACEMENT 12 Place Log I on the two left pins of Log B as shown below...
Page 54: ...39357 0 1018 Page 54 LOG PLACEMENT 14 Place Log K on far right pin of Log B as shown below...
Page 57: ...39357 0 1018 Page 57 LOG PLACEMENT 17 The log assembly is now complete...