![background image](http://html1.mh-extra.com/html/empire-comfort-systems/millivolt-standing-pilot-dvx36fp31l-4/millivolt-standing-pilot-dvx36fp31l-4_installation-instructions-and-owners-manual_2403951058.webp)
39357-0-1018
Page 58
18. After all logs are properly positioned, place small "dime"
size pieces of Rockwool lightly across the front round
"blueflame" ports. Place the ember material (Rockwool
pieces) side by side. Do not stack more than one layer
of embers across the burner ports.
See Figure 64.
Figure 64
19. Replace glass door onto firebox.
20. Secure the two glass frame spring clamps at bottom of
firebox.
21. Align the tabs on top louver brackets with slots in front
posts to secure top louver.
22. Close bottom louver. Lift slightly to engage the end tabs
into the slots in fireplace sides to close louver panel.
WARNING
Failure to position the parts in accordance with
this diagram or failure to use only parts specifically
approved with this appliance may result in property
damage or personal injury.
Figure 65
Attention: Refer to Log Identification Pages 42 and 43,
and Figures 66 and 67 to order logs.
CAUTION: If a log is broken, cracked or chipped, order
a replacement log. See page 59.
LOG PLACEMENT
Summary of Contents for MILLIVOLT STANDING PILOT DVX36FP31L-4
Page 52: ...39357 0 1018 Page 52 LOG PLACEMENT 12 Place Log I on the two left pins of Log B as shown below...
Page 54: ...39357 0 1018 Page 54 LOG PLACEMENT 14 Place Log K on far right pin of Log B as shown below...
Page 57: ...39357 0 1018 Page 57 LOG PLACEMENT 17 The log assembly is now complete...