39357-0-1018
Page 44
Before you begin: If you are installing logs into the DVx36 or
DVX42 model then this fireplace is supplied with a set of 13
ceramic fiber logs. Do not handle these logs with your bare
hands. Always wear gloves to prevent skin irritation from
ceramic fibers. After handling logs, wash your hands gently
with soap and water to remove any traces of fiber.
The positioning of logs is critical to safe and clean operation
of this fireplace. Sooting and other problems may result if the
logs are not properly and firmly positioned in the fireplace.
Please refer to
Figures 65 through 67
and corresponding
WARNING
, when completing the following log placement
steps.
LOG PLACEMENT
1. Remove top and bottom louvers.
2. Remove glass door from firebox.
3. Remove logs from bun.
4. Place
Log A
onto the rear part of the burner over the
pilot.
Summary of Contents for MILLIVOLT STANDING PILOT DVX36FP31L-4
Page 52: ...39357 0 1018 Page 52 LOG PLACEMENT 12 Place Log I on the two left pins of Log B as shown below...
Page 54: ...39357 0 1018 Page 54 LOG PLACEMENT 14 Place Log K on far right pin of Log B as shown below...
Page 57: ...39357 0 1018 Page 57 LOG PLACEMENT 17 The log assembly is now complete...