![background image](http://html.mh-extra.com/html/empire-comfort-systems/dvx36dp31n-3/dvx36dp31n-3_installation-instructions-and-owners-manual_2404104075.webp)
31453-6-0914
Page 75
1
R7331 BLOWER MOTOR
2
31920
SWITCH ASSEMBLY
3
R4192 SPEED CONTROL KNOB
4
R4186 SPEED CONTROL
FBB4 VARIABLE SPEED BLOWER INSTALLATION
JUNCTION BOX WIRING INSTALLATION INSTRUCTIONS
CAUTION: All wiring should be done by a qualified elec-
trician and shall be in compliance with all local, city and state
building codes. Before making the electrical connection,
make sure that main power supply is disconnected. The
appliance, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local
codes, with the national electrical code ANSI/NFPA 70 (latest
edition).
A factory installed junction box is located on the lower right side of
the fireplace. Wiring must be fed to the junction box and attached
to the receptacle that is provided. Leave approximately 6” of wire
in the junction box for connection.
Attach black wire to one side of the receptacle and white wire to
opposite side of receptacle. The ground wire should be attached to
the green (ground) screw.
Install the receptacle into the junction box. Attach cover plate.
Figure 80
Summary of Contents for DVX36DP31N-3
Page 21: ...31453 6 0914 Page 21 Figure 31 Figure 29 Figure 30 EXAMPLES TOP VENT RUN ...
Page 35: ...31453 6 0914 Page 35 DVVK 4FV DIRECT VENT TERMINATION KIT cont Figure 54 ...
Page 49: ...31453 6 0914 Page 49 Figure 71 MILLIVOLT SYSTEM STANDING PILOT WIRING DIAGRAM ...
Page 72: ...31453 6 0914 Page 72 PARTS VIEW Note Refer to page 46 when ordering logs ...