Emotron EMX-D, Instruction Manual

Page: 30 / 53

Emotron AB 01-5016-01r0 Operation via the Control Panel 23
Fig. 23 Menu structure
6.3.1 The main menu
This section gives you a short description of the functions in
the Main Menu.
100 Normal view
Displayed at power-up. This menu displays the actual proc-
ess status. If Rotation monitor is connected, actual speed of
the heat exchanger rotor is displayed.
300 View reference speed
Displays Reference Speed.
700 View Operation and Status
Viewing all the operational data like frequency, load, power,
current, etc.
800 View Trip Log
Viewing the last 10 trips in the trip memory.
O00 EMX-D Options
Settings for the operation are changed in these menus.
6.4 Programming during
operation
Most of the parameters can be changed during operation
without stopping the VSD. Parameters that cannot be
changed are marked with a lock symbol in the display.
6.5 Editing values in a menu
Most values in the second row in a menu can be changed in
two different ways.
Alternative 1
When you press the + or - keys to change a value, the cursor
is flashing to the left in the display and the value is increased
or decreased when you press the appropriate key. If you keep
the + or - keys pressed, the value will increase or decrease
continuously. When you keep the key pressed the change
speed will increase. Press Enter to confirm the value.
Alternative 2
Press the + or - key to enter edit mode. Then press the Prev
or Next key to move the cursor to the right most position of
the value that should be changed. The cursor will make the
selected character blink. Move the cursor using the Prev or
Next keys. When you press the + or - keys, the character at
the cursor position will increase or decrease. This alternative
is suitable when you want to make large changes, i.e. from
200 s to 30 s.
Example: When you press Next the 4 will blink.
Press Enter to save the setting and Esc to leave the edit
mode.
NOTE: If you try to change a function during operation
that only can be changed when the motor is stopped, the
message “Stop First” is displayed.
O13 MotMaxSpeed
Stp
200
O15 Purge Time
Stp
2.00s
Flashing
O15 Purge Time
Stp
4.00s
A
Flashing